Home > Products > Panel Saws > CPF 18/5 Moulder
Moulder
  PF 350
  Basic Machine Includes:
  • Service Spanners
  • Instruction manual
  
  Tech Mark, Inc.
7901 Industry Drive
North Little Rock, AR 72117		  
  Phone (800) 787-6747
Fax (501) 945-0312
Mail info@tech-mark.com		  
 
Visit the Tech Mark website:
           www.tech-mark.com
 
 
 
Moulder
  CPF 18/5 Moulder
  Five head moulder
CPF 18/5 Moulder
PDF FormatZOOM		  
 
  Max. diameter of wood 7.07" x 4.72"
  Min. diameter of wood 0.63" x 0.24"
  Min length of wood 16.90"
  Max. stock removal 0.39" x 0.24"
  Length of entry table 66.81"
  Diameter of shafts 11/4
  Diameter of cutterblock 1st Spindle 4.72"
  Min. Diameter of tooling spindle #2-#5 3.93"
  Max. Diameter of tooling spindle #2-#5 7.07"
  Spindle RPM Feed Speed 6000 RPM
  Feeding speed 12-60 ft per minute
  Diameter of feeding rollers 4.72"
  Suction dust hood diameter 4.72"
  Main motor power 1@10 hp, 3@7.5 hp
  Feeding motor power 2 hp
  Noise level with technology LpAeq 100.7 dB (A)
     
   
 
  Overhead Electrical Control Panel
(includes Upper suction Hood listed below)		  
  Digital indication of rip fence  
  Three-phase braking motor, 9 HP, 60Hz  
  Single-phase braking motor, 3.6 HP, 60Hz  
     
   
     
©2003 Tech Mark, Inc., All rights reserved.