Home > Products > Spindle Shapers > FS 550
  FS 550
  Basic Machine Includes:
  • Cast-Iron right table extension w/front retractable
  • Sliding tenoning table w/angle fence
  • Three-phase braking motor, 10 HP, 60 Hz
  • Five speed settings
  • Tenoning cover for cutterhead safety
  • Shaper split fence, each micro-adjustable
  • Shaper reversing switch
  • Spindle lock for 0° , -5° , 45°
  • Under table dust collection
  • Overload protection
  • UL Standard
  • Service spanners
  • Instruction handbook
  
  Tech Mark, Inc.
7901 Industry Drive
North Little Rock, AR 72117		  
  Phone (800) 787-6747
Fax (501) 945-0312
Mail info@tech-mark.com		  
 
Visit the Tech Mark website:
           www.tech-mark.com
 
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
 
  FS 550
  Shaper for serial production of doors & windows
FS 550
PDF Format ZOOM		  
 
  Working table size 47 1/4” x 30 ¾”
  Sliding Tenoning Table Size 41 3/8” x 13”
  Front table extension size 26” x 17 ¾”
  Shaper speeds 1400-3500-6000-8000-1000 RPM
  Sliding tenoning table travel 57 7/8”
  Max. diameter of table opening 12.6”
  Work spindle diameter (step) 1 ¼” (40 mm, 50 mm)
  Spindle tilting -5° to 45°
  Spindle length 6.89” (9.45”)
  Max. spindle stroke 7.87”
  Max./Min dia. of tool for profiling 9 7/8” / 3 1/8”
  Max./Min dia. of tool for tenoning 13 ¾” / 3 1/8”
  Suction dust hood diameter 5"
  Motor 10 HP, 60 Hz
  Electrical 230V, 1Ø
  Net weight 2100 lbs.
     
   
 
  Overhead Electrical Control Panel  
  Electric spindle stroke
(includes overhead control panel listed above)
  
  40 mm or 50 mm Spindle Diameter
(enables longer spindle length of 9.45”)		  
     
   
 
  Revolving tenoning stop  
  Tenoning plate for short workpieces  
  Shaper Fence for round profiles  
  Shaper cutterhead kit – FH 40 R/4  
   
©2003 Tech Mark, Inc., All rights reserved.