Home > Products > Panel Saws > PF 350
  PF 350
  Basic Machine Includes:
  • 126” (10.5 ft) “format” sliding table & outrigger
  • 3-phase, 9 HP motor, 60 Hz
  • Scoring unit with separate motor
  • Cut up to 13 /16” dado (w/insert)
  • Upgrade Rip fence with micro-adjustment
  • Upper suction hood & saw guard
  • CV3 sliding table angle fence
  • Sliding Table Stop Bar
  • Straight-Line Rip Stop
  • Outrigger Roller
  • Outrigger Aluminum Extension
  • 59" rip table extension
  • Overload protection
  • UL Standard
  • Instruction handbook
 
  Tech Mark, Inc.
7901 Industry Drive
North Little Rock, AR 72117		  
  Phone (800) 787-6747
Fax (501) 945-0312
Mail info@tech-mark.com		  
 
Visit the Tech Mark website:
           www.tech-mark.com
 
 

 
  PF 350
  14” Panel Saw with 126” (10.5 ft) Aluminum Sliding Table
PF 350
PDF FormatZOOM		  
 
  Max. diameter of main saw blade 14"
  Working table size 19" x 46 5/8"
  Sliding table size 13” x 126” (11 1/4 “ x 102”)
  Crosscut support frame size 24 ¾” x 55 1/8”
  Main saw arbor 1"
  Blade tilting 0° to 45°
  Max. cut height at 90° 4 5/8”
  Max. cut height at 45° 3 ¼”
  Speed of scoring blade 8530 RPM
  Speed of main blade 4352 RPM (3500/5000) RPM
  Scoring saw arbor 20mm
  Scoring saw blade dia. 100mm
  Rip Capacity 59"
  Cross-cut capacity 126"
  Suction dust hood dia. 4"
  Scoring Motor 3/4 HP (0.5 kw)
  Electrical 230V, 3Ø
  Net weight 1,367 lbs.
     
   
 
  Overhead Electrical Control Panel  
  Electrical Tilting Arbor to 45°
(includes overhead control panel listed above)
  
  Electrical blade height adjustment
(includes overhead control panel listed above)		  
  Both electrcial blade height & tilt  
  Two-Speed settings for main saw blade  
  Digital indication of rip fence  
     
   
 
  Carbide saw blade 300mm (12")  
  Split scoring blade 100mm (4")  
     
   
©2003 Tech Mark, Inc., All rights reserved.