Home > Products > Panel Saws > PF 400S
  PF 400S
  Basic Machine Includes:
  • 126” (10.5 ft) CV3 “format” sliding table and outrigger
  • Three-Speed, 3-phase, 9 HP motor, 60 Hz
  • Scoring unit with separate motor
  • Cut up to 13 /16” dado (w/insert)
  • Upgrade Rip fence with micro-adjustment
  • Upper suction hood & saw guard
  • CV3 sliding table angle fence
  • Sliding Table Stop Bar
  • Straight-Line Rip Stop
  • Outrigger Roller
  • Outrigger Aluminum Extension
  • 59" rip table extension
  • Overload protection
  • UL Standard
  • Instruction handbook
 
  Tech Mark, Inc.
7901 Industry Drive
North Little Rock, AR 72117
 
  Phone (800) 787-6747
Fax (501) 945-0312
Mail info@tech-mark.com
 
 
Visit the Tech Mark website:
           www.tech-mark.com
 
 

 

  PF 400S
  16” Panel Saw with 126” (10.5 ft) Aluminum Sliding Table
PF 400S
PDF FormatZOOM
 
 
  Max. diameter of main saw blade 16"
  Working table size 19 5/8” x 46 5/8”
  Sliding table size 13” x 126”
  Crosscut support frame size 24 ¾” x 55 1/8”
  Main saw arbor 1"
  Blade tilting 0° to 45°
  Max. cut height at 90° 5 1/4”
  Max. cut height at 45° 3 5/8”
  Speed of scoring blade 10236 RPM
  Speed of main blade 3200/4000/6000 RPM
  Scoring saw arbor 20 mm
  Scoring saw blade dia. 125 mm
  Rip Capacity 59"
  Cross-cut capacity 126"
  Suction dust hood dia. 4"
  Scoring Motor 3/4 HP (0.5 kw)
  Electrical 230V, 3Ø
  Net weight 2,249 lbs.
     
   
 
  Sliding table 15 1/8” x 126”  
  Overhead Electrical Control Panel  
  Electrical Tilting Arbor to 45°
(includes overhead control panel listed above)
 
  Electrical blade height adjustment
(includes overhead control panel listed above)
 
  Both electrcial blade height & tilt  
  Three-Phase braking motor, 11.75 Hp, 60 Hz  
  Digital indication of rip fence  
     
   
 
  Carbide saw blade 400mm  
  Split scoring blade 125mm  
  Small support table for CV3 Angle Fence  
     
   
©2003 Tech Mark, Inc., All rights reserved.